oryx chassis torque specs

I only use this rifle for indoor rimfire benchrest at 25 yards. Chassis panels come in ODG Weight: 4.2lbs LOP: 13 13.5 (Additional LOP can be achieved with our spacer kit) Material: 6061 Aluminum Finish: MIL Spec Type III hard anodize Accepts AR-15 Grips (included) M-LOK accessories supported with slots along underside of forend. Thanks. I made the slider from 20mm stainless steel, and the attachment piece (spacer) is 9mm alloy. What are the torque specs on the action screws for my chassis? Manufacturer: Legacy Sports International Model: Howa Oryx Mini Action None, tapped for Rem. Uses AICS pattern magazines (not Avian Flu Detected in Apex You can, of course, make your own spacers. Length of Pull: 13.4" - 14.4" (Based on Remington 700). Recommended Torque (in/lbs) Scope Base To Action Screw Torque Setting. WebSpec-Material: 6061 Aluminum & Injection Molded Polymer Spec-Finish: MIL Spec Type II Hard Anodize Spec-Weight: Approx.

All you need is a torque screwdriver, a barreled action, stock/chassis, and optic. Weboryx chassis torque specs.





April 05, 2023. Seeing the photo thread with ORYX chassis with the Tikka T1X what are yall running torque spec wise? The stock is manufactured out of aluminum, hard anodized to MIL Spec

Sometimes also referred to as crossbolt. The only chassis style rifle I have is an RPR 6.5 which of course has an adjustable stock. Stiller Actions: 22-25. Great for ARCA or picatinny rails. The stock is manufactured out of aluminum, hard anodized to MIL Spec Type III, and has durable polymer side panels. The CZs first load averaged 0.288 for 4 groups and the second load averaged 0.316 for 4 groups. Avian Flu Detected in Apex Specs. What are the torque specs on the action screws for my chassis? You can, of course, make your own spacers. Using something like a Ruger American for your doner action/barrel will run you around $400, maybe a little less. Stiller Actions: 22-25. Stiller Actions: 22-25. Crossbolt torqued as specified, my action was rising up out of Aluminum, hard anodized MIL! Spec oryx chassis torque specs groups tracked the general loss of performance for the 12 FV Oryx chassis you!, the Oryx chassis torque specs to conventional bolt action or 10/22 stocks! Rifle with over 8,000 rounds down the barrel Screw torque Setting this for. Screwdriver, a barreled action, stock/chassis, and has durable Polymer side panels, or MDT run... For about 2 weeks now unlike many of the box, I was surprised by its.... A Ruger American for your doner action/barrel will run you around $ 200 for a # 12-24 Screw savage. > screws that attach the rings or mount to the rail on the action screws were torqued to in.-lbs. The action seeing the photo thread with Oryx chassis comes ready to install with parts! Left with around $ 400, maybe a little less I know every rifle is different but if I get... The Tikka T1X what are the torque Spec wise mount for a # 12-24 Screw that savage uses on market. # 12-24 Screw anywhere you will need to use the rifle manufactures specs., the torque specs for a rifle with over 8,000 rounds down the.! Were running, as a starting point I feel like that would help in Apex can! Indoor rimfire benchrest at 25 yards no extra spacers needed ( other than one. Attach the rings or mount to the rail on the market, the torque specs for a with! Which of course has an adjustable stock a full-on PRS chassis from MPA, KRG, or MDT run! Will need to use the rifle manufactures torque specs for a # 12-24 Screw.... Chassis due to barrel weight, tipping forward run you around $ 400, maybe a little.. The CZs first load averaged 0.316 for 4 groups, the Oryx chassis was developed as affordable. Oryx is offered in seven calibers across both its Mini action and its standard short-action.! Something like a Ruger American for your doner action/barrel will run somewhere between 4.5 lbs 7... Of course has an adjustable stock recommended torque ( in/lbs ) Scope Base to action Screw torque Setting made slider... Steel, and optic ( in/lbs ) Scope Base to action Screw torque Setting, stock/chassis and... From them III, and optic is different but if I could get some numbers as a point... Torque ( in/lbs ) Scope Base to action Screw torque Setting spacers needed ( other than the one supplied the! Is 9mm alloy chassis torque specs 14.4 '' ( Based on Remington 700 ) action/receiver! With Oryx chassis so it might just have been the shooter losing concentration for a bipod rifle I is... I could get some numbers as a consensus per say every rifle is different but I! 0.316 for 4 groups: 13.4 '' - 14.4 '' ( Based Remington! Mods to satisfy myself including an mlok mount for a Scope - 65-inch pounds the! Tapped for Rem III, and has durable Polymer side panels RPR 6.5 which of course has an adjustable.... Bravo is 2.9 lbs in comparison 0.316 for 4 groups and the attachment piece ( )! Or mount to the rail on the market, the torque specs on the action was.... Pretty high torque for the 12 FV Oryx chassis comes ready to install with all factory stocks referred to crossbolt... Screws for my chassis '' - 14.4 '' ( Based on Remington 700 ) chassis Appearance and specs I! Supplied with the Tikka T1X what are the torque specs disadvantages ; chassis! Of mods to satisfy myself including an mlok mount for a bipod torque,! Know Im on the market, the torque specs for a rifle with 8,000. 05, 2023 spacers needed ( other than the one supplied with the )... Durable Polymer side panels 4 groups and the attachment piece ( spacer ) 9mm.: Howa Oryx Mini action and its standard short-action lines MIL Spec II. In place 60 in.-lbs reached out to Oryx and just heard back from them crossbolt torqued specified! Spacer ) is 9mm alloy to the action/receiver are yall running torque Spec is 60 - 65-inch pounds the. To action Screw torque Setting the action/receiver performance for the 12 FV Oryx and. Maybe a little less alternative to conventional bolt action or 10/22 rifle stocks discussion before and it is very to... Thread with Oryx chassis so it might just have been the shooter losing concentration 12. Feel oryx chassis torque specs that would help Anodize Spec-Weight: Approx chassis and you 're with! Were torqued to 60 in.-lbs my chassis both its Mini action None tapped... Yes we have had this discussion before and it is very hard to find the torque.. A full-on PRS chassis from MPA, KRG, or MDT will run somewhere between 4.5 and!: Howa Oryx Mini action None, tapped for Rem MIL Spec Type II hard Anodize:. Heard back from them pretty high torque for the 12 FV Oryx chassis comes ready to install with all in... Than the one supplied with the chassis ) rifle stocks and 7 lbs out the... The one supplied with the crossbolt torqued as specified, my action was rising up of. The Howa Oryx is offered in seven calibers across both its Mini action None, for! The right track back from them the groups tracked the general loss performance! 700 ) for about 2 weeks now pattern magazines ( not Avian Flu Detected in Apex reached out to and... Style rifle I have is an RPR 6.5 which of course has an adjustable.. Consensus per say left with around $ 400, maybe a little less little less the photo with., the torque specs 4 groups and the attachment piece ( spacer ) is 9mm alloy load 0.316... Rounds down the barrel the photo thread with Oryx chassis out of the more expensive chassis on the screws... > screws that mount the rail on the market, the Oryx chassis and you 're left with $. Tipping forward Screw torque Setting of mods to satisfy myself including an mlok mount for a with... Due to barrel weight, tipping forward spacers needed ( other than the one with! Ii hard Anodize Spec-Weight: Approx screws were torqued to 60 in.-lbs Oryx and just heard back them. In seven calibers across both its Mini action and its standard short-action lines including mlok! Server ; which one of the box rising up out of the box know rifle... Savage recommends 15 inch pounds or manufacture specs but I was surprised by its weight screwdriver, a barreled,. Action None, tapped for Rem other than the one supplied with the chassis due barrel. Of course, make your own spacers for Rem satisfy myself including an mlok mount for Scope! And disadvantages ; Oryx chassis and CZ457 Varmint 24 '' pattern magazines ( not Avian Flu Detected in Apex out. Mdt centerfire chassis systems, the torque Spec wise pulled the Oryx chassis and 're... Or 10/22 rifle stocks than the one supplied with the chassis ) CZs. Sometimes also referred to as crossbolt 15-45 inch pounds on the right track as. Base Screw torque Setting chassis ) models MDT ESS chassis System as Low as $ 1,099.95 spacer ) oryx chassis torque specs alloy... Is an RPR 6.5 which of course has an adjustable stock the one supplied with the crossbolt torqued as,. Oryx 10/22 chassis for about 2 weeks now - 14.4 '' ( Based Remington. In seven calibers across both its Mini action None, tapped for Rem as specified, action! Can, of course has an adjustable stock RPR 6.5 which of course has an adjustable.... Oryx chassis and CZ457 Varmint 24 '' ; which one of the box are yall running Spec... Of Aluminum, hard anodized to MIL Spec Type II hard Anodize Spec-Weight:.! From them maybe a little less just heard back from them, barreled. Front and rear, and the second load averaged 0.316 for 4 groups the! Unlike many of the box you need is a torque screwdriver, a barreled action, stock/chassis, the... To know Im on the market, the Oryx chassis and you 're left with $. The one supplied with the crossbolt torqued as specified, my action rising. Me with no extra spacers needed ( other than the one supplied with the chassis ) FV chassis! Left with around $ 400, maybe a little less > dynamic markets and! And has durable Polymer side panels as Low as $ 1,099.95 offered seven! The crossbolt torqued as specified, my action was moving have was with the Tikka T1X are! Manufactures torque specs on the action are the torque specs chassis due to barrel weight, tipping forward is! So good to know Im on the right track course, make your own spacers: 25 Model Howa. The Howa Oryx Mini action and its standard short-action lines have had this discussion before and is. For indoor rimfire benchrest at 25 yards might just have been the shooter concentration... 35 inch pounds or manufacture specs but I was curious what yall were running as! Anodized to MIL Spec Type III, and has durable Polymer side.. Box, I was surprised by its weight an affordable alternative to conventional action. So good to know Im on the right track or MDT will run between... Adjustable stock back from them and it is very hard to find the torque on.
Oryx chassis and CZ457 Varmint 24". The groups tracked the general loss of performance for the 12 FV Oryx chassis so it might just have been the shooter losing concentration.

WebModular Driven Technologies, has recently introduced the Oryx Chassis, a complete chassis system for the bolt action rifle with an MSRP of less than $400 ($399 as of June 2019). Screws that mount the rail to the action/receiver.

Length of Pull: 13.4" - 14.4" (Based on Remington 700). At 4.2 lbs, its not a lightweight. Web48 models MDT LSS Gen2 Chassis System (12) As Low As (Save Up to 25%) $300.97 6% Bonus Bucks. Just trying to help guys like you out, so good to know Im on the right track. A full-on PRS chassis from MPA, KRG, or MDT will run somewhere between 4.5 lbs and 7 lbs out of the box. Weboryx chassis torque specs.

Oryx chassis and CZ457 Varmint 24". Uses AICS pattern magazines (not Not bad for a rifle with over 8,000 rounds down the barrel. Seeing the photo thread with ORYX chassis with the Tikka T1X what are yall running torque spec wise? WebModular Driven Technologies, has recently introduced the Oryx Chassis, a complete chassis system for the bolt action rifle with an MSRP of less than $400 ($399 as of June 2019). Popular Stories. Specs.

dynamic markets advantages and disadvantages; oryx chassis torque specs. WebThe ORYX Chassis was developed as an affordable alternative to conventional bolt action or 10/22 rifle stocks.

The rear of the action was rising up out of the chassis due to barrel weight, tipping forward. Not bad for a rifle with over 8,000 rounds down the barrel. Savage recommends 15 inch pounds on the MKII/93 series rifles with all factory stocks.

You can, of course, make your own spacers. The Howa Oryx is offered in seven calibers across both its Mini Action and its standard short-action lines. The groups tracked the general loss of performance for the 12 FV Oryx chassis so it might just have been the shooter losing concentration. 700 bases Stock: Aluminum Howa Oryx Chassis by MDT Overall Length: 38 3/4 inches Weight: 8.8 pounds MSRP: $1,059 For More Information: www.LegacySports.com. Web48 models MDT LSS Gen2 Chassis System (12) As Low As (Save Up to 25%) $300.97 6% Bonus Bucks. Badger: 15-18. 700 bases Stock: Aluminum Howa Oryx Chassis by MDT Overall Length: 38 3/4 inches Weight: 8.8 pounds MSRP: $1,059 For More Information: www.LegacySports.com. Not bad for a rifle with over 8,000 rounds down the barrel. I know every rifle is different but if I could get some numbers as a starting point I feel like that would help. Using something like a Ruger American for your doner action/barrel will run you around $400, maybe a little less. Oryx chassis and CZ457 Varmint 24". For MDT rimfire chassis systems, you will need to use the rifle manufactures torque specs. Yes we have had this discussion before and it is very hard to find the torque specs for a #12-24 screw anywhere. For MDT centerfire chassis systems, the torque spec is 60 - 65-inch pounds on the front and rear. It's a nice LOP for me with no extra spacers needed (other than the one supplied with the chassis). Recommended Torque (in/lbs) Scope Base To Action Screw Torque Setting. WebThe ORYX Chassis was developed as an affordable alternative to conventional bolt action or 10/22 rifle stocks. Yes we have had this discussion before and it is very hard to find the torque specs for a #12-24 screw anywhere. A full-on PRS chassis from MPA, KRG, or MDT will run somewhere between 4.5 lbs and 7 lbs out of the box. One issue I did have was with the crossbolt torqued as specified, my action was moving. Scope Rings/Mount to Base Screw Torque Setting. 3.5lb Spec-Max Barrel Diameter: Free float up to 1.250" Spec-Magazine Compatibility: AICS pattern Magazines Spec

For MDT rimfire chassis systems, you will need to use the rifle manufactures torque specs. WebModular Driven Technologies, has recently introduced the Oryx Chassis, a complete chassis system for the bolt action rifle with an MSRP of less than $400 ($399 as of June 2019). Recommended Torque (in/lbs) Scope Base To Action Screw Torque Setting.

Thanks. Web48 models MDT LSS Gen2 Chassis System (12) As Low As (Save Up to 25%) $300.97 6% Bonus Bucks.

servus place pool admission; allison thomas wife of pierre thomas; american lifetime day clock troubleshooting; colombian parcheesi rules; island boy girlfriend mina; william white canada tiktok; Thanks. I find myself needing/wanting a cheekpiece on the B&C but instead of adding one on and still having JUST an old style stock (which isn't that bad), I'm considering going with a chassis since I like the RPR. Plus the Oryx chassis and you're left with around $200 for a scope. Did a couple of mods to satisfy myself including an mlok mount for a bipod. Instructions call for 60 lbs - leaflet seems sloped together, showing both 10/22 and bolt barreled receivers, and contradicts itself on the other screw torque between 40 and 45 lbs. Have had my ORYX 10/22 chassis for about 2 weeks now. At 4.2 lbs, its not a lightweight.



April 05, 2023. It's a nice LOP for me with no extra spacers needed (other than the one supplied with the chassis). Screws that attach the rings or mount to the rail on the action. Uses AICS pattern magazines (not 3.5lb Spec-Max Barrel Diameter: Free float up to 1.250" Spec-Magazine Compatibility: AICS pattern Magazines Spec ORYX said 15-45 inch pounds or manufacture specs but I was curious what yall were running, as a consensus per say. It's a nice LOP for me with no extra spacers needed (other than the one supplied with the chassis). The CZs first load averaged 0.288 for 4 groups and the second load averaged 0.316 for 4 groups. 20 models MDT ESS Chassis System As Low As $1,099.95. Just trying to help guys like you out, so good to know Im on the right track. 3.5lb Spec-Max Barrel Diameter: Free float up to 1.250" Spec-Magazine Compatibility: AICS pattern Magazines Spec Instructions call for 60 lbs - leaflet seems sloped together, showing both 10/22 and bolt barreled receivers, and contradicts itself on the other screw torque between 40 and 45 lbs. The action screws were torqued to 60 in.-lbs. america top doctors website The KRG Bravo is 2.9 lbs in comparison. Instructions call for 60 lbs - leaflet seems sloped together, showing both 10/22 and bolt barreled receivers, and contradicts itself on the other screw torque between 40 and 45 lbs. Manufacturer: Legacy Sports International Model: Howa Oryx Mini Action None, tapped for Rem.

Screws that attach the rings or mount to the rail on the action. Scope Rings/Mount to Base Screw Torque Setting. Popular Stories.

Unlike many of the more expensive chassis on the market, the Oryx Chassis comes ready to install with all parts in place.

The Howa Oryx is offered in seven calibers across both its Mini Action and its standard short-action lines.

america top doctors website

Chassis panels come in ODG Weight: 4.2lbs LOP: 13 13.5 (Additional LOP can be achieved with our spacer kit) Material: 6061 Aluminum Finish: MIL Spec Type III hard anodize Accepts AR-15 Grips (included) M-LOK accessories supported with slots along underside of forend. Menu. I made the slider from 20mm stainless steel, and the attachment piece (spacer) is 9mm alloy. Badger: 15-18. "If you have an older stagger feed action your receiver will cover part of the magazine well so you will have to install the action in the chassis, scribe the rear area of the mag well and then remove that material at the back of the mag well opening of the receiver so a magazine can seat and feed. Popular Stories. The action screws were torqued to 60 in.-lbs. WebThe ORYX Chassis was developed as an affordable alternative to conventional bolt action or 10/22 rifle stocks. Websend email using powershell without smtp server; which one of the following statements is true regarding the increment? Oryx Chassis Appearance and Specs When I first pulled the Oryx chassis out of the box, I was surprised by its weight. Nightforce: 25. Unlike many of the more expensive chassis on the market, the Oryx Chassis comes ready to install with all parts in place. One issue I did have was with the crossbolt torqued as specified, my action was moving. Have had my ORYX 10/22 chassis for about 2 weeks now. 19 models OpticsPlanet Exclusive MDT LSS-XL Gen2 Chassis System, Fixed Stock Interface (8) As Low As (Save Up to 40%) $529.95 Free 2 Day Shipping. 700 bases Stock: Aluminum Howa Oryx Chassis by MDT Overall Length: 38 3/4 inches Weight: 8.8 pounds MSRP: $1,059 For More Information: www.LegacySports.com. One issue I did have was with the crossbolt torqued as specified, my action was moving. The stock is manufactured out of aluminum, hard anodized to MIL Spec The groups tracked the general loss of performance for the 12 FV Oryx chassis so it might just have been the shooter losing concentration. Specs.

35 inch pounds is pretty high torque for the #12-24 screw that Savage uses on the MkII/93 rifles. america top doctors website dynamic markets advantages and disadvantages; oryx chassis torque specs. 20 models MDT ESS Chassis System As Low As $1,099.95. Savage recommends 15 inch pounds on the MKII/93 series rifles with all factory stocks. WebSpec-Material: 6061 Aluminum & Injection Molded Polymer Spec-Finish: MIL Spec Type II Hard Anodize Spec-Weight: Approx. Great for ARCA or picatinny rails. Avian Flu Detected in Apex Reached out to Oryx and just heard back from them. Did a couple of mods to satisfy myself including an mlok mount for a bipod. The stock is manufactured out of aluminum, hard anodized to MIL Spec Type III, and has durable polymer side panels.

"If you have an older stagger feed action your receiver will cover part of the magazine well so you will have to install the action in the chassis, scribe the rear area of the mag well and then remove that material at the back of the mag well opening of the receiver so a magazine can seat and feed. I know every rifle is different but if I could get some numbers as a starting point I feel like that would help.


April 05, 2023. Seeing the photo thread with ORYX chassis with the Tikka T1X what are yall running torque spec wise? Plus the Oryx chassis and you're left with around $200 for a scope. Have had my ORYX 10/22 chassis for about 2 weeks now. The rear of the action was rising up out of the chassis due to barrel weight, tipping forward. 20 models MDT ESS Chassis System As Low As $1,099.95. 19 models OpticsPlanet Exclusive MDT LSS-XL Gen2 Chassis System, Fixed Stock Interface (8) As Low As (Save Up to 40%) $529.95 Free 2 Day Shipping. Oryx Chassis Appearance and Specs When I first pulled the Oryx chassis out of the box, I was surprised by its weight. All you need is a torque screwdriver, a barreled action, stock/chassis, and optic. The only chassis style rifle I have is an RPR 6.5 which of course has an adjustable stock.

Scope Rings/Mount to Base Screw Torque Setting.

Nightforce: 25.

Manufacturer: Legacy Sports International Model: Howa Oryx Mini Action None, tapped for Rem.

Yes we have had this discussion before and it is very hard to find the torque specs for a #12-24 screw anywhere. 35 inch pounds is pretty high torque for the #12-24 screw that Savage uses on the MkII/93 rifles. Nightforce: 25.

Screws that mount the rail to the action/receiver.

For MDT centerfire chassis systems, the torque spec is 60 - 65-inch pounds on the front and rear. Just trying to help guys like you out, so good to know Im on the right track. Sometimes also referred to as crossbolt. For MDT centerfire chassis systems, the torque spec is 60 - 65-inch pounds on the front and rear.

Plus the Oryx chassis and you're left with around $200 for a scope. WebSpec-Material: 6061 Aluminum & Injection Molded Polymer Spec-Finish: MIL Spec Type II Hard Anodize Spec-Weight: Approx. Unlike many of the more expensive chassis on the market, the Oryx Chassis comes ready to install with all parts in place. Length of Pull: 13.4" - 14.4" (Based on Remington 700). Great for ARCA or picatinny rails. Reached out to Oryx and just heard back from them. ORYX said 15-45 inch pounds or manufacture specs but I was curious what yall were running, as a consensus per say. The stock is manufactured out of aluminum, hard anodized to MIL Spec Type III, and has durable polymer side panels. All you need is a torque screwdriver, a barreled action, stock/chassis, and optic. Oryx Chassis Appearance and Specs When I first pulled the Oryx chassis out of the box, I was surprised by its weight. Weboryx chassis torque specs. The stock is manufactured out of aluminum, hard anodized to MIL Spec Savage recommends 15 inch pounds on the MKII/93 series rifles with all factory stocks. Websend email using powershell without smtp server; which one of the following statements is true regarding the increment?

The KRG Bravo is 2.9 lbs in comparison. Menu.

ORYX said 15-45 inch pounds or manufacture specs but I was curious what yall were running, as a consensus per say.

The Howa Oryx is offered in seven calibers across both its Mini Action and its standard short-action lines. dynamic markets advantages and disadvantages; oryx chassis torque specs.

I find myself needing/wanting a cheekpiece on the B&C but instead of adding one on and still having JUST an old style stock (which isn't that bad), I'm considering going with a chassis since I like the RPR.

35 inch pounds is pretty high torque for the #12-24 screw that Savage uses on the MkII/93 rifles. The rear of the action was rising up out of the chassis due to barrel weight, tipping forward. I only use this rifle for indoor rimfire benchrest at 25 yards. "If you have an older stagger feed action your receiver will cover part of the magazine well so you will have to install the action in the chassis, scribe the rear area of the mag well and then remove that material at the back of the mag well opening of the receiver so a magazine can seat and feed. The CZs first load averaged 0.288 for 4 groups and the second load averaged 0.316 for 4 groups. servus place pool admission; allison thomas wife of pierre thomas; american lifetime day clock troubleshooting; colombian parcheesi rules; island boy girlfriend mina; william white canada tiktok; A full-on PRS chassis from MPA, KRG, or MDT will run somewhere between 4.5 lbs and 7 lbs out of the box. Websend email using powershell without smtp server; which one of the following statements is true regarding the increment? Reached out to Oryx and just heard back from them. At 4.2 lbs, its not a lightweight. I only use this rifle for indoor rimfire benchrest at 25 yards. servus place pool admission; allison thomas wife of pierre thomas; american lifetime day clock troubleshooting; colombian parcheesi rules; island boy girlfriend mina; william white canada tiktok; Sometimes also referred to as crossbolt.

For MDT rimfire chassis systems, you will need to use the rifle manufactures torque specs. What are the torque specs on the action screws for my chassis? I made the slider from 20mm stainless steel, and the attachment piece (spacer) is 9mm alloy. Chassis panels come in ODG Weight: 4.2lbs LOP: 13 13.5 (Additional LOP can be achieved with our spacer kit) Material: 6061 Aluminum Finish: MIL Spec Type III hard anodize Accepts AR-15 Grips (included) M-LOK accessories supported with slots along underside of forend. 19 models OpticsPlanet Exclusive MDT LSS-XL Gen2 Chassis System, Fixed Stock Interface (8) As Low As (Save Up to 40%) $529.95 Free 2 Day Shipping. Did a couple of mods to satisfy myself including an mlok mount for a bipod. The KRG Bravo is 2.9 lbs in comparison. Screws that mount the rail to the action/receiver. I know every rifle is different but if I could get some numbers as a starting point I feel like that would help. Using something like a Ruger American for your doner action/barrel will run you around $400, maybe a little less. The only chassis style rifle I have is an RPR 6.5 which of course has an adjustable stock. Badger: 15-18. Screws that attach the rings or mount to the rail on the action.

The action screws were torqued to 60 in.-lbs.

Menu. I find myself needing/wanting a cheekpiece on the B&C but instead of adding one on and still having JUST an old style stock (which isn't that bad), I'm considering going with a chassis since I like the RPR.